Use this command in the remote asterisk console (asterisk -rv) to force an endpoint to check config. In the example,
1229 views
Enter the following commands in the FreePBX CLI to fix this issue:
fwconsole setting FPBX_ARI_USER <15-char-rnd-string> fwconsole setting FPBX_ARI_PASSWORD <30-char-rnd-string> fwconsole
1662 views
While it's not advised to open any provisioning ports to the open internet, in some cases this may be a
1037 views
By default Digium phones and newer FreePBX versions mated together will ring and then intercom for intercom and paging calls
1133 views
Here are the commands to enter to complete an upgrade from FreePBX 15 to 16. In most of our installs
1477 views
We use this tutorial for deployment of Cisco ATAs for faxing. Be sure to update the ATA firmware to the
1266 views
In our FreePBX installs, we use the following upstream shaper based on DSCP markings. Modify the bandwidth and DSCP marking
3553 views
We run this script manually monthly on all of our FreePBX installs. It performs the following actions, in order:
Fix FreePBX
996 views
Use the following command via cron within Linux/FreePBX to purge monitor recordings regularly. In the example below we are deleting
1088 views
Add the following entries to any Yealink phone in the FreePBX EPM. Descriptions of each variable is below the first
1302 views