Use this command in the remote asterisk console (asterisk -rv) to force an endpoint to check config. In the example,
902 views
Enter the following commands in the FreePBX CLI to fix this issue:
fwconsole setting FPBX_ARI_USER <15-char-rnd-string> fwconsole setting FPBX_ARI_PASSWORD <30-char-rnd-string> fwconsole
1288 views
While it's not advised to open any provisioning ports to the open internet, in some cases this may be a
674 views
By default Digium phones and newer FreePBX versions mated together will ring and then intercom for intercom and paging calls
810 views
Here are the commands to enter to complete an upgrade from FreePBX 15 to 16. In most of our installs
1116 views
We use this tutorial for deployment of Cisco ATAs for faxing. Be sure to update the ATA firmware to the
947 views
In our FreePBX installs, we use the following upstream shaper based on DSCP markings. Modify the bandwidth and DSCP marking
2512 views
We run this script manually monthly on all of our FreePBX installs. It performs the following actions, in order:
Fix FreePBX
683 views
Use the following command via cron within Linux/FreePBX to purge monitor recordings regularly. In the example below we are deleting
738 views
Add the following entries to any Yealink phone in the FreePBX EPM. Descriptions of each variable is below the first
926 views